Lipstick Machines

We are engaged in offering Filling Vessels that are integrated with variable speed drive stirrer and directly connected with the filling head. These are manufactured using quality material like stainless steel and well known for their excellent performance, optimum quality & durability. Our range of Filling Vessel is used to fill the packaging with the material and highly demanded in various industries.

• No pipelines required
• Filling head is heated at a temperature of 50C to 60C
• When there is no filling, heating pad comes into operation
• Heating pad touches the nozzle so that the liquid inside the nozzle also stays hot
• A kajal filling fixture will be placed below the filling head
• Heating pad and filling fixture are pneumatically operated
• Filling fixture goes up while filling it starts coming down
• Eliminate the occurrence of air bubble

We hold expertise in providing Lipstick Flaming machines that are provided with conveyor & shrink tunnel. Fabricated using quality-tested components, these are well known for their excellent performance & high efficiency. Our range of Lipstick Flaming Machines finds application in various industries.

• With the help of the conveyor belt the lipsticks(R) would move ahead
• Place the lipstick holders and let it be open
• It would pass through the gas flaming tunnel
• At opposite ends gas flamers are provided, as the lipsticks come out, there would be glow on it
• Place the cap and shrink sleeve manually on the lipstick
• put them back on the running conveyor, as they pass the shrink tunnel and come out
• Sleeves would be perfectly wrapped

Following are the salient features of our range :

( 20 feet Long) Model :- RPC/20/LPST

• S.S. 304, 1.6 mm. thick top with water proof plywood for alignment vibration
• Stand made from heavy duty M.S. Pipe with full powder coated adjustable Height 50mm
• DERCO German makes 2 mm. Thk. 2 LR A.5 O.
• FAD Green endless conveyor belt
• It is Specially good resistance to oil, solvent, fats & other packing material.
• Temperature Resistance 15c to 110c
• Speed of the Conveyor : Variable by A.C. Motor controller or AC Imported Inverters Make 'DELTA'
• A.C Worm reduction gear motor
• Easy Dismantling & Assembly
• Table top in two parts & stand can be fully dismantle system
• Variable speed by V.F.D controller
• Conveyor Table Size: 850mmw x 750mm x 25feet
• Conveyor Motor: Geared Motor/0.5 H.P AC
• Conveyor Speed: Variable by VFD controller

(LPG) Gas Flaming Station :

We specialize in providing (LPG) Gas Flaming Stations that are set up using stainless steel gas chamber with toughened glass on all 4 sides with window. These are provided with special heat resistant conveyor belt and a separate air regulator with filter. (LPG) Gas Flaming Stations offered by us can also be availed without LPG cylinder & regulator and are also integrated with the following :

• Gas flame stopper on both sides
• Separate air regulator with filter
• Special heat resistant conveyor belt
• System provided for regulation of gas & air adjust while flaming – 2 sets
• Heat resistant matt for packing conveyor
• Matt fitted on top side to avoid damage from flame
• Gas Flaming Tunnel Size :- 600 x 600 x 700mm H

We are engaged in offering Lipstick Manufacturing Vessels with Stirrer that are manufactured using quality-tested components keeping in mind the latest technology. These vessels are integrated with a stand, which is made using mild steel angle and plate & covered by S.S 304 material. Our range of Lipstick Manufacturing Vessel is in high great demand because of its following attributes :

• Automatic oil circulation system provided for better constant
• D.C variable speed drive stirrer will be fixed of the vessel
• All contact parts will be coming from S.S 316
• Variable speed of stirrer by D.C geared motor
• Height of tank will be adjusted by manual clamp
• Digital temperature control provided for oil temperature of jacketed vessel
• All necessary equipment will be provided in control panel

Salient Features :

• S.S. 304, 1.6 mm Thick Top muff buffing with waterproof plywood for alignment vibration.
• Stand made from heavy duty M.S. Pipe, which is fully powder, coated.
• Adjustable height 50mm
• ‘DERCO’ HABASIT make 2mm thick 2 LR A.5 0.FAD Green endless conveyor belt.
• It has especially good resistance to oil, solvent, fats & other packing material.
• Temperature resistance is 15c to 110c.
• A.C. Worm reduction Gear Motor, Bonfiglioli – Italian make.
• Easy dismantling and assembly.
• Table Top in two parts and the stand can be fully dismantled.
• Speed of the conveyor is variable by imported AC frequency drive with start stop push button control box.

• S.S. 304, 1.6 mm Thick Top muff buffing with waterproof plywood for alignment vibration.
• Stand made from heavy duty M.S. Pipe, which is fully powder, coated.
  
• Adjustable height 50mm
• DERCO’ HABASIT make 2mm thick 2 LR A.5 0.FAD Green endless conveyor belt.
• It has especially good resistance to oil, solvent, fats & other packing material.
• Temperature resistance is 15c to 110c.
• A.C. Worm reduction Gear Motor, Bonfiglioli – Italian make.
  
• Easy dismantling and assembly.
• Table Top in two parts and the stand can be fully dismantled.
• Speed of the conveyor is variable by imported AC frequency drive with start stop push button control box.

We specialize in providing Chilling Plates that are manufactured using quality material. These are widely used for reliability, excellent efficiency and high performance. Our range of Chilling Plates is compact design and meets the demands of various industries.

• After filling the liquid in aluminum stick making mold chilling plate for solid of stick
• Set the required temperature up to 25C by digital temperature control of Machine control panel
• Temperature has reached to a required degree
• Filled liquid aluminum multi cavities mold on top of the Chilling plate
• Within 4 to 5 minutes the aluminum mold will get chilled and liquid will change in to solid form
• Remove the mold for further operation

Following are the quality attributes of our range:

• Full GMP model
• Heavy duty compressor for fast cooling
• Compact model with digital temperature control
• Heavy S.S 304 top plat form

We are one of the distinguished manufacturers and suppliers of Lipstick Gas Flaming Chamber on Conveyor. These are fabricated using quality material like stainless steel and provided with toughened glasses, thereby ensuring their durability & high strength. Our range of Lipstick Gas Flaming Chambers is appreciated for its quality features, which is tabulated as follows:

• Open up the Lipstick(s) and place them on the running conveyor
• A prominent selection & sufficient distance between the two lipstick(s)
• Lipstick(s) would enter the GAS flaming chamber
• Chamber has got two flaming head
• Flaming head requires LPG gas as well compressor
• Both the LPG and Compressor are provided regulator’s to adjust the flow of the respective
• When the lipstick enters this chamber, the first flaming head, glossies one side of the lipstick and 2nd head the other side of it
• Upper degree of the lipstick(s) is not deformed
• If shrink wrapping has to be done, it can be provided on the conveyor as well as a different tunnel joining the conveyor
• Lipstick(s) comes out of the flaming chamber and is ready for other operations such as carton packing

We hold expertise in providing Lipstick Hot Plates that are integrated with mild steel heavy duty pipe stand, which is powder coated. The top of this stand is made using SS 304 and has high strength. Our range of Lipstick Hot Plates is also available with panel box & drawer, , powder coated caster along with locking systems.