Rajshree Enterprise

We hold expertise in offering Bottle Cap & Label Vertical Shrink Wrapping Machines that are provided with flat LF acetal nylon/ S.S. 304 slate chain conveyor and a cooling fan zone. Fabricated using quality-tested components, these machines are easy to operate, require low maintenance and highly durable. Our range of Bottle Cap & Label Vertical Shrink Wrapping Machines is highly acclaimed for its following features:

• S.S. ‘Fin’ type straight tabular heaters with turbo blower fan
• Conveyor variable speeds drive system
• Auto Digital temperature control
• Full heavy duty powder coated body covers and electric panel
• To seal and center label can seal at one time and individual

• Take the filled bottles and insert the body and cap label (if required cap label) on to it
• Place the bottles one by one on the machine conveyor that pass through the shrink tunnel for shrink wrapping and
• Bottles are collected from the other side of the machine

This is can be made online with your filling machine. If you require automatic rotating model, then you cannot place the machine online, you would have to place the bottles one by one on the holders

We are engaged in offering Flat Mash Conveyor Double Shrink Tunnels that are widely used in various industries. In these machines, the printed labels are placed on the bottle/box and the running flat conveyor, which further enter the 1^st tunnel. Our range of Flat Mash Conveyor Double Shrink Tunnel is at par with industry standards and highly acclaimed for its quality attributes:

• Flat mash conveyor provided by S.S./carbon/Teflon material
• Semi finish-heat shrink tunnel and finish tunnel is specially designed for odd or ‘difficult’ shaped product
• Both the tunnels have heaters on all the four sides(two sides for model no.RF/RRK/200/D)
• Each heater has individual control for flexibility
• Each heater is equipped with separated MCB
• Both the tunnels are equipped with separate digital temperature control
• Specially designed S.S tubular finned heaters for minimum power consumption and maximum heat transfer
• Heavy duty turbo blower for effective and efficient hot air circulation
• ‘A’ Class insulation provided with glass ceramic/glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Over backed heat resistant power coated used
• Individual A.C. frequency drive controller is used to vary the speed of conveyor and blower
• Auto Digital temperature control for each tunnel
• Cooling fan tunnel specially provided to bring the finished product to optimum temperature

We hold in-depth expertise in offering Vertical Rotating Bottle Double Shrink Tunnels that are well known for their easy operations, high performance and efficiency. These are available in varied specifications and meet the application requirements of diverse industries. Vertical Rotating Bottle Double Shrink Tunnel provided by us is appreciated for its following features:

• Individual bottle-holders are provided which are self rotating.
• S.S. slate chain conveyor mounted with bearing cap & bottle mounting sprockets
• Each heater is equipped with separated MCB
• Semi finish-heat shrink tunnel and finish tunnel is specially designed for odd or ‘difficult’ shaped product.
• Both the tunnels have heaters on three the sides; each heater has individual control for flexibility
• Both the tunnels are equipped with separate digital temperature control
• Specially designed S.S tubular finned heaters for minimum power consumption and maximum heat transfer
• Heavy duty turbo blower for effective and efficient hot air circulation
• Class insulation provided with glass ceramic/glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Over backed heat resistant power coated used
• Individual A.C. frequency drive controller is used to vary the speed of conveyor and blower
• Auto Digital temperature control for each tunnel
• Cooling fan specially provided to bring the finished product to optimum temperature.

• Printed labels are placed on the bottle/jar/cup (product)
• Product is to be placed on the individual holder
• Start rotating automatically as soon as they
• Enter the 1st tunnel (semi finish-heat shrink)

Following process takes place in the 1st tunnel :

We are engaged in offering Fully Automatic Both Side Web Sealing and Shrink Tunnels that are manufactured using quality material. In these machines, the pack that is to be shrink wrapped is placed on a running conveyor belt that will automatically collect the filled bottles, jars, pots, cans and boxes into a pack. The pack, which is loosely sealed from two opposite sides, will further be pushed into the tunnel of the shrink wrapping machine and come out duly shrink wrapped from the other side. Other details of the product:

• A pneumatic cylinder will push the pack on to a film roll that will be on the top and bottom of the machine
• Web sealer will automatically cut and seal the opposite end

Some of the quality attributes of our range is as follows:

• Double reel sleeve wrapping system for the bundling of any kind of cylindrical, rectangular and irregular shaped products
• Auto Conveyor for automatic conveying of packs can be provided on LHS -/- RHS
• On the loading table, product feeding is manually arranged with push button for the starting of the automatic cycle
• Space saving sleeve, pneumatic pusher for automatic intake of packs
• Individual sealing bar with twin sealing elements
• Endless PVC or S.S. slate chain conveyor
• Specially designed S.S. tubular finned heaters for minimum power consumption and maximum heat transfer
• Heavy duty turbo blower for effective and efficient hot air circulation
• Class insulation is integradted with glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Over backed heat resistant power coated used
• Lading and cooling zone provided as standard feature as outlet
• Heavy duty A.C. motor provide with gear box and controller for heavy load conveyor
• Stainless steel conveyor roller with silicone coated
• Auto temperature control
• Full heavy duty power coated tunnel covers and electric panel board

We are counted amongst the prominent manufacturers and suppliers of Shrink Wrapping Machine (Tunnel) with Teflon Mash Conveyors. These are provided with specially designed S.S tubular finned heaters for minimum power consumption and maximum heat transfer. Our range of Shrink Wrapping Machines is well known for its optimum quality, long working life and excellent performance.

Other details of the product:

• Bottle is placed with printed sleeve inserted on it, on the roller of the machine
• Roller will take the bottle inside the shrink wrapping tunnel
• By using the heating principle, label/ sleeve will be shrink wrapped to the bottle
• bottle will out of the machine from the other side

Listed below are the quality attributes of our range:

• Heavy duty turbo blower for effective and efficient hot air circulation
• Class insulation is provided with glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Over backed heat resistant power coated used
• Lading and cooling zone provided as standard feature as outlet
• Heavy duty A.C. motor provide with gearbox and controller for heavy load conveyor
• Teflon mash conveyor idol for group shrink wrapping
• Auto temperature control
• Full heavy duty power coated tunnel covers and electric panel board

We hold in-depth expertise in offering Glass Filled Cap Sleeve Shrink Wrapping Tunnels that are highly acclaimed for their easy operations, excellent performance and high efficiency. Available in varied specifications, these machines are extensively used in diverse industries. Being customer friendly, we also facilitate our clients by providing our range at competitive prices.

• Makes out off M S Sheet Metal thick 1.6 to 2.5 MM & M.S
• Pipe thick 2.5 Powder coated
• All sides’ walls insulation by ceramic wool, glass wool and thickness of wall is 55 mm
• Internal tunnel window path is plated
• All three sides S S 304 tubular heaters provided for equal temperatures
• A turbo blower mounted on top of the tunnel, its distributing equal quantity of the air to the tunnel path through heaters
• Control panel mounted with Tunnel & constructed standard electrical equipment like digital temperature control MCB power input indicator
• Speed regulator for blower fan
• Heavy-duty square pipe stand for mounting of tunnel by four nos
• Height adjustable stud for required height adjust as per bottle height

Listed below are the salient features of our range:

• Compact hand operated table model
• Height adjustable by thread bar
• Digital temperature control
• Aluminum heating ram
• Powder coated platform & cover

We provide Shrink Wrapping Machines that are available in different models such as double tunnel, horizontal rotating bottle. These are manufactured using quality components and used for shrink wrapping of difficult size and shape of bottles & other related products. Our range of Shrink Wrapping Machines is available with an auto digital temperature control for each tunnel.

Place the printed labels on the bottle/box (product) and the product is to be placed on the running conveyor, if the bottle/box (product) is round the bottle/product would rotate between two rollers and forward, and if it is flat, it will move forward from one roller to the other. When you place the product on the conveyor and when it enters the 1st tunnel the following things take place:--

Following are the salient features of our range:

• Pre-heat shrink tunnel and finish tunnel is specially designed for odd or ‘difficult’ shaped product
• Tunnels have heaters on all the four sides, each heater has individual control for flexibility
• Both the tunnels are equipped with separate digital temperature control
• Specially designed S.S tubular finned heaters for minimum power consumption and maximum heat transfer
• Heavy duty turbo blower for effective and efficient hot air circulation
• Class insulation is available with glass ceramic/glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Over backed heat resistant power coated used
• Individual A.C. frequency drive controller is used to vary the speed of conveyor and blowers
• Auto Digital temperature control for each tunnel
• Cooling fan tunnel specially provided to bring the finished product to optimum temperature

We provide an extensive range of Automatic 'L' Bar Sealing Machines, which is fabricated using quality components that ensures durability & excellent performance. This is provided with an automatic conveyor for conveying the sealed product to tunnel. Our range of Automatic 'L' Bar Sealing Machines is in high demand due to its following significant features:

• Pneumatically operated ‘L’ sealing bar
• System for air hole of wrapping film
• Spring loaded cutting and sealing element
• Body and stand powder coated
• Require parts made from S.S. 316
• System for adjust of the machine height with casters
• Automatic cut and seal

• U-folded film roll the loose end is to be sealed once so that one permanent ‘L’ remains
• Product is to be inserted into the fold of the film and pushing it into push button
• Sealing arm is to be moved down
• After the set time is over the sealed arm shall come up automatically
• Product is thus wrapped in the film loosely with film from all sides

We are engaged in offering Seal & Shrink Wrapping Machines that are widely used in various industries. These are manufactured using quality material and appreciated for their low maintenance & long working life. Our range of Seal & Shrink Wrapping Machines possesses an automatic controllable sealing time and is in great demand due to its following features:

• Only one operator is needed
• Cutting, Sealing & Shrinking in single operation
• Reduced maintenance & economic range at reasonable prices
• Minimum overall dimension
• Reduced electric consumption
• Automatic Controllable sealing time
• Thermostatically controlled shrinking temperature
• System run’s on a signal circuit
• Temperature compensating Solid-state sealing safety system
• Specially designed high quality sealing pad
• Easy to hang sealing wire tension assembly

We hold expertise in providing Semi-Automatic Web Sealing Machines that are highly durable and require low maintenance. These are used for the impulse sealing of heavy weight products to packl products. Our range of Semi-Automatic Web Sealing Machines is well known for its following quality attributes:

• Double reel sleeve wrapping system for the bundling of any kind of cylindrical
• Rectangular and irregular shaped products
• Product feeding manually arranged on the loading table
• Individual sealing bar with twin sealing elements
• Consists of a feeder table to facilitate holding and loading of the tray
• Sealing and pushing arms are pneumatically operated
• Film roll mounting arrangement is provided on the upper & bottom side
• Control panel is complete with the necessary electrical items
• Specially designed S.S. tubular finned heaters for minimum power consumption and maximum heat transfer
• Heavy duty turbo blower for effective and efficient hot air circulation.
• Class insulation provided with glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Full heavy duty power coated tunnel covers and electric panel board

• Place the product on the platform of the machine
• Provided with press the two push buttons that would move forward
• Seal the product by the film rolls which be on the top and bottom of the machine
• Place the another product
• Again press the push buttons
• Second product would push the first product into the shrink tunnel and shrink the product

We specialize in providing Steam Shrink Tunnel Machines through which steam distribution can be done by 4 row of pipes on both the sides. These are fabricated using quality components in conformation with industry norms and standards. Steam Shrink Tunnel Machines offered by us is in great demand due to its following features:

• M.O.C S.S. 304
• Double wall provided for minimum temperature loss
• Even steam distribution by 4row of pipes on both sides
• Individual adjustment/0ff system for each row of pipes by individual valve
• Valve can operate from outside of the tunnel
• Tunnel height can be adjusted by hand-wheel i.e. manual operation
• Steam pressure re-lift valve/ with pressure gas provided
• Steam trap for water separating & water discharge

Semi-Automatic ( Both Side ) Web Sealing Machine (Manual Pushing)

Place the Product on the platform of the machine, press the two Push buttons provided, it would move forward and seal the product by the film rolls which be on the top and bottom of the machine.  

Place the another product, again press the push buttons, this product would push the first product into the shrink tunnel and shrink the product

Salient Features :

• Double reel sleeve wrapping system for the bundling of any kind of cylindrical,
• Rectangular and irregular shaped products.
• Product feeding manually arranged on the loading table.
• Individual sealing bar with twin sealing elements.
• It consists of a feeder table to facilitate holding and loading of the tray.
• The sealing and pushing arms are pneumatically operated.
• The film roll mounting arrangement is provided on the upper & bottom side.
• The control panel is complete with the necessary electrical items.
• Specially designed S.S. tubular finned heaters for minimum power consumption and maximum heat transfer.
• Heavy duty turbo blower for effective and efficient hot air circulation.
• Class insulation provided with glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods.
• Full heavy duty power coated tunnel covers and electric panel board.

We are engaged in offering Shrink Wrapping Machines (Tunnel) that are available with Teflon Mash Conveyor and heavy turbo blower for an effective & efficient hot air circulation. Fabricated using quality components, these are available in different models & specifications. Our range of Shrink Wrapping Machines is highly appreciated by our clients for its following features:

• Specially designed S.S. tubular finned heaters for minimum power consumption and maximum heat transfer
• Class insulation provided with glass wool and asbestos/calcium silicate sheet for machine panel and silicon tubing for conveyor rods
• Over backed heat resistant power coated used
• Lading and cooling zone provided as standard feature as outlet
• Heavy duty A.C. motor provide with gearbox and controller for heavy load conveyor
• Teflon mash conveyor idol for group shrink wrapping
• Auto temperature control
• Full heavy duty power coated tunnel covers and electric panel board

• Place the bottle with the printed sleeve inserted on it, on the roller of the machine
• Roller will take the bottle inside the shrink wrapping tunnel
• Label/ sleeve will be shrink wrapped to the bottle by using the heating principle
• Bottle will out of the machine from the other side

Place the bottle with the printed sleeve inserted on it, on the roller of the machine. This roller will take the bottle inside the shrink wrapping tunnel. Here the label/ sleeve will be shrink wrapped to the bottle by using the heating principle. After which the bottle will out of the machine from the other side.

• Specially designed S.S. tubular finned heaters for minimum power consumption and
  maximum heat transfer.
• Heavy duty turbo blower for effective and efficient hot air circulation.
• Class insulation provided with glass wool and asbestos/calcium silicate sheet for machine
  panel and silicon tubing for conveyor rods.
• Over backed heat resistant power coated used.
• Lading and cooling zone provided as standard feature as outlet.
• Heavy duty D.C. motor provide with gearbox and controller for heavy load conveyor.
• Stainless steel conveyor roller with silicone coated.
• Auto temperature control.
• Full heavy duty power coated tunnel covers and electric panel board.

• CONVEYOR SPEED: 3 SPEEDS BY STEP PULLEY.
• WITHOUT COOLING ZONE.
• THIS MACHINE IS CONSTRUCTED WITH SILICONE COATED ROLLERS, IF TEFFLON MASH MATERIAL IS REQUIRED, IT WILL COST EXTRA.

Note :  If Machine is for export, the costing would be as per conversion rate of dollar during dispatch equivalent to INR.